TDCV Ductile Iron Tilting Disc Non-slam Tarisa Valve ine Lever & Counter Weight uye Damper

WALTER TDCV Tilting Disc Check Valve ndiyo vharuvhu isingadzoke inosarudzwa mumambure epombi uko kunodiwa kuvhara nekukurumidza. Kuburikidza neiyo counter lever uye huremu hwakasungirirwa kune shaft yayo, inovimbisa yakapfava yakavhurika zvichienderana nekumhanya kwekuyerera uye inochengetedza yakadzikira yekuvhara nguva kana kuyerera kwamira. Nedhizaini yayo yedhisiki apo nzvimbo inochinjirwa mumaakisi maviri, izvi zvinotungamira kune kuvandudzwa kukuru pakudzikira kwemaitiro torque, kudzikisira kukweshera panzvimbo yekuisa chisimbiso uye hupenyu hwesevhisi hwakawedzerwa.

Feature:

1.Double Eccentric / Double Offset Disc Design
2.Soft seal inopa kudonha zvakasimba kuvhara
3.Tilting disc - painogadziriswa zvinoenderana inoda kudiki kwazvo kumberi kudonhedza kudonha kuvhurika
4.Adjustable lever uye uremu kubatsira vharafu pakuvhara kudzivirira mvura sando - anoitawo sechinzvimbo chiratidzo.
5.Zvose zvisimbiso uye zvipfeko zvine chokuita nepakati zvinobvumirwa kunwa mvura
6.Low torque zvinodiwa panguva yekushanda
7.Full coating pamuviri uye disc mukati & kunze neavhareji ye250 microns. Ukobvu hwepamusoro hwehuputi hunowanikwa kana zvichidiwa.

Unyanzvi Dhata:

1.Design: EN 1074-3
2.Face to Face: EN558 Series 14
3.Flanges: BS EN1092-2 PN10/16/25; ISO7005-2
4.Kuedza: EN 12266-1
5.Size Range: DN150 - 2000
6.Pressure Rate: 1.0 Mpa; 1.6 Mpa; 2.5 Mpa
7.Tembiricha: -10°C ~ 80°C
8.Kupfeka: Fusion Bonded Epoxy Resin.

1，Tilting Disc Check Valve, Slanted Seat Check Valve, Butterfly Type Check Valve, Non-slam Check Valve
2，Tilting Disc Non-slam Cheki Mavharuvhu akaiswa mukupomba maapplication kudzivirira kudzosera kumashure muhurongwa. Zvikamu zvese zvemukati isimbi isina tsvina kana yakaputirwa nemvura yekunwa yakatenderwa epoxy, lever uye uremu hwakasungirirwa kumucheto weshaft kuti ubatsire kuvhara vharafu pamberi pekuyerera kusati kwachinja nzira kana hydraulic damper inoita kuti dhisiki risanyura muchigaro uye kukonzera. sando yemvura.
3,DN150 - 2000, PN10/16/25

1.Mvura Inotakurika / Mvura Yakachena
2.Kurapa Mvura
3.Industrial zvikumbiro